All steel experimental bench
Precautions during the construction of all-steel experimental benches:
1. Do not place sharp metals, tools and similar substances on the all-steel experimental bench.
2. During construction, do not remove the countertop protective film.
3. Do not wear shoes when operating on the table without protection. Be sure to pave the surface first.
operating steps:
1. First, paste the textured paper on the joint between the two countertops.
2. Apply silicone or epoxy resin glue with the same color as the countertop. If there is a 3mm gap left on the countertop, the glue must be filled to avoid cracking of the joint and peeling of the glue.
3. After 20 minutes, use a metal sheet or scraper to scrape the adhesive on the platform surface, tear off the masking paper, and clean the surface.
4. Apply a circle of white silicone to the joint between the countertop and the cabinet. Pay attention to protecting the countertop during operation, as scratches, chipped corners, etc. may occur.
