The installation of the all-steel experimental bench can basically be divided into two methods (glue valve and screw fixing method):
        1. Apply silicone evenly on the bonding surface of the connected cabinets. The surrounding silicone should be 10mm-15mm away from the edge of the cabinet to prevent glue from overflowing after pressing on the top.
        2. After gluing, place the countertop flatly on the cabinet. When laying it flat, try to put it in place for the first time. Do not allow anyone to misplace it to prevent the glue from overflowing and falling on the cabinet when moving, making it difficult to clean and affecting the bonding effect.
        3. The line transitions placed on the tabletop and the tabletop should be smooth. If the tabletop is uneven, two methods of padding and heavy pressing can be used. That is, the ground should be raised with hard materials, and the high places should be pressed down with heavy objects, depending on the situation.
       4. After the glue dries, press the front countertop, and then proceed with the joint processing of the countertop.
        all-steel experimental bench operating steps:
       1. First, paste the textured paper on the joint between the two countertops.
       2. Apply silicone or epoxy resin glue with the same color as the countertop. If there is a 3mm gap left on the countertop, the glue must be filled to avoid cracking of the joint and peeling of the glue.
        3. After 20 minutes, use a metal sheet or scraper to scrape the adhesive on the platform surface, tear off the masking paper, and clean the surface.
       4. Apply a circle of white silicone to the joint between the countertop and the cabinet. Pay attention to protecting the countertop during operation, as scratches, chipped corners, etc. may occur.
        all-steel experimental bench notes:
        1. Do not place sharp metals, tools and similar materials on the table.
       2. During construction, do not remove the countertop protective film.
        3. Do not wear shoes when operating on the table without protection. Be sure to pave the surface first.
        Please indicate the source for reprinting:http://www.mdpsb.com