A brief discussion on the key points of pipeline design and planning of laboratory gas system
1. In order to facilitate the replacement of gas cylinders, a high-pressure resistant metal hose should be equipped from the gas cylinder connector to the regulating valve.
2. In the entire laboratory gas line system, in order to avoid backfire, explosion-proof check valves should be installed.
3. Before the gas enters the point of use, in order to facilitate the control of the gas switch, a point-of-use ball valve should be set up.
4. In order to maintain gas purity and
Laboratory air circuitTo ensure the airtightness of the system, the pipes are all made of 316L stainless steel pipes, and the inner surface is treated with AP.
5. In order to facilitate the maintenance and replacement of valve parts, high-pressure double ferrule joints should be used to connect pipelines and valve parts.
6. Pipe fixings (pipe clamps) should be made of high-temperature-resistant metal materials and must be strong, lightweight, and easy to use.
7. Taking into account the reasons of sturdiness, anti-corrosion, ease of use and beauty, the pressure regulating valve control panel is made of stainless steel.
7. In order to ensure the pressure stability and gas purity of gas output, two pressure reduction systems are selected (i.e. one pressure reduction system and one pressure reduction system, two pressure reduction equipment are provided).
