When we use laboratory furniture, we can find that it is very common for it to get damp. Once it gets damp, it will have a great impact on everyone's work. Therefore, I hope that everyone can pay attention to its moisture-proof treatment during daily use, so as to avoid causing bad problems to everyone's work.

       Moisture is the enemy of laboratory furniture, whether it is made of woodExperimental benchIt is still an all-steel experimental bench. If it is not moisture-proof during production, it will be easily corroded by moisture. The corroded wooden furniture will be deformed, and the moisture will cause the wooden structure to become loose. Even after drying, the service life of the equipment will be greatly reduced. All-steel solid furniture will produce rust if it is corroded by water. Once the metal equipment rusts, the stability of the structure will become worse and the appearance will be affected.

        If you want to prevent the experimental bench from getting damp, you must carry out moisture-proof treatment during processing and production. High-temperature epoxy resin powder spraying is a common protective measure. This material has good waterproof, insulation, and corrosion resistance, and it is firmly fixed on the surface of the equipment through the use of high-temperature baking paint. This protective layer isolates external moisture so that the furniture itself will not get damp.

        The wooden experimental bench needs to be dried to minimize the moisture content of the equipment, so as to avoid cracking after long-term use of the equipment. The moisture content of the treated wood should be close to the environment in which it is used. Wooden materials cannot be painted, so the bottom surface needs to be sealed and then painted with resin paint. In addition to protecting the surface of the wooden experimental bench, this coating can also prevent the intrusion of external moisture and give it specific heat resistance.