socket: Usually a steel 96x96 slope steel socket shell is used, and the socket is a five-hole or six-hole waterproof socket.

        testing faucets: Specifications include triple, double, single, remote control faucets, T-shaped, vertical faucets, etc. The material is cast copper; the wall thickness is 2.5mm, porcelain water valve, and the surface is sprayed with epoxy resin powder. The connection screws for water supply pipes and pipe joints and faucets are British 1/2 joints. The water supply pipes of the experimental bench are made of copper pipes and aluminum-plastic pipes, and the joints are made of cast copper materials.

        foot: It is a combination structure of stainless steel screws, nylon cover and rubber base. It has the characteristics of anti-slip, shock absorption, adjustable height and level, acid and alkali corrosion resistance, strong load-bearing capacity, etc. If the experimental bench is not placed properly, the balance can be adjusted and the height can be adjusted to 3-5 cm.

        slide rail: bottom-type automatic self-closing guide rail.

       Experimental benchThe integrity of the countertop should be maintained as much as possible, and joints should be minimized, and joints should not be joined vertically. Check whether there is a water stop under the outer edge of the countertop, check the location and interfaces of water, electricity, gas and air ducts, check whether there are any deviations from the design, communicate in a timely manner, and determine subsequent solutions.

        The use of laboratory furniture is often in contact with water, electricity, gas, chemical substances and materials, as well as instruments and equipment. Therefore, in addition to pursuing the comfort of the experimental environment and the agility of installation and layout, higher requirements are also put forward for the structure and material design standards of the furniture.

        In order to meet the needs of laboratories with different experimental contents, laboratory furniture should meet the quality requirements of experiments such as functionality, sturdiness, and corrosion resistance.